Forum

Welcome Guest 

Show/Hide Header

Welcome Guest, posting in this forum requires registration.





Pages: [1]
Author Topic: chronos build issues
cjwalms
Newbie
Posts: 4
Permalink
Post chronos build issues
on: October 3, 2015, 01:21
Quote

Hi all,
I have built my controller but am having issues. everything works until I plug the motor in. It works fine at the start sometimes but then when I go to POS to move the motor it will move. then the screen starts to scramble and goes dull. It looks like it is jumping back and forth through all the modes. when I unplug the motor it goes back to normal.

The motor works in both directions when the screen starts to play up the motor also starts making noise.

any Ideas will be much appreciated.
Thanks

Chris@Chro-
nos
Administrator
Posts: 137
Permalink
Post Re: chronos build issues
on: October 3, 2015, 01:24
Quote

Can you post a link to the specs of the motor, and show the wiring?
Also a top pic of the solder job on the board, and the top of the motor driver

Sounds like a voltage fluctuation, it could be that the motor driver needs to be adjusted, but lets start with some pics and info on the motor :)

cjwalms
Newbie
Posts: 4
Permalink
Post Re: chronos build issues
on: October 4, 2015, 06:53
Quote

not sure how to put photos on this forum but hope this works.

cjwalms
Newbie
Posts: 4
Permalink
Post Re: chronos build issues
on: October 4, 2015, 06:54
Quote

Hi Chris,
Thanks for the quick reply. Here is the link to the motor specs

http://www.makerstore.com.au/download/datasheets/23HD56005Y-30B.pdf

Image
Image
Image

not sure if these photos are able to be seen, if not can someone please let me know how to upload photos please?

I am also having issues with the in button. sometimes when I push it it comes up as set. Not sure but I read on this site somewhere I can download a program and check the buttons.

Chris@Chro-
nos
Administrator
Posts: 137
Permalink
Post Re: chronos build issues
on: October 6, 2015, 23:56
Quote

Can you just email them to me at ProjectChronosHelp@gmail.com?

might be easier that way :)

Sorry for the delay, been crazy busy with some projects

Pages: [1]
The Chronos Project | Time Lapse Motion Control
©2013